Electrical

G&S Supply has a large inventory of high quality PVC electrical fittings from manufacturers such as Cantex, Multi (Kraloy), and Carlon. With a large inventory, most orders ship the same day from our warehouses located throughout the country. Fittings are UL Listed by their manufacturers where required and spec sheets are available upon request.

Electrical Tools
High Quality Electrical Tools for wire pulling, blowing, and other work
Hinged Cover Junction Boxes
Hinged Cover Junction Boxes are surface mounted enclosure without entrance hubs which allows multiple conduits to be connected and wire splices made within. Nema 4X PVC Hinged Cover Junction Boxes is manufactured with rigid 1/4â€ PVC and has all welded construction.
PVC Junction Boxes
PVC Electrical Junction Boxes are surface mounted enclosures without entrance hubs which allows multiple conduits to be connected and wire splices made within.
PVC Trough
PVC Trough is a surface mounted enclosure without entrance hubs which allows multiple conduits to be connected and wire splices made within. Nema 4X Trough is manufactured with rigid 1/4â€ PVC and has all welded construction

Rigid Electrical Fittings
Switches
Toggle, rotary, rocker, push-button, pull-chain, plastic and door switches
Wire Management
Metal, rubber insulated and plastic varieties
EMT Fittings

Molded Stop Couplings
Molded Stop Couplings are used to join same diameter size PVC pipes. Molded with a center stop for proper seating and depth of conduit joint.
Female Adapters
UL Listed Female Adapters are commonly used to connect threaded steel conduit or connectors to PVC conduit.
Terminal Adapters
Threaded or Male Adapters are commonly used to connect PVC conduit to a threaded PVC or steel conduit bell.
Junction Box Adapters
PVC Junction Box Adapters are used to connected PVC conduit to a PVC junction box.

PVC Bends
PVC Elbows are used to change direction of conduit run.
ENT & fittings
ENT (electrical non-metallic tubing) conduit and fittings are used with ENT Conduit in ceilings, walls and slabs and are concrete tight when proper solvent cement is used for installation.
Outdoor Outlet Boxes & Covers
Surface mounted Outdoor Outlet Boxes & Covers electrical boxes are used for straight line conduit runs, splices, and controls. Our line of F-Series boxes, weatherproof covers and cover plates give contractors greater ease of installation and cost savings on the job site.
End Caps
End Caps are solvent cemented on to the end of a PVC run to cap the run.

Expansion Joints
PVC two piece expansion joints allow for expansion and contraction of a run of PVC conduit.
Molded End Bells
Molded End Bells provide a smooth surface at the cut end of the conduit to prevent damage to wires during pulling.
Service Entrance Fittings
Service Entrance Fittings (also called weather heads or mastheads) are installed on a vertical conduit, usually outdoors, to receive open wires from an electrical service line
Reducer Bushings
Molded Reducers are used to smoothly transition from one diameter of PVC Conduit to another

Pipe Straps
Pipe straps, or clamps, are u-shaped and are used to anchor conduit to interior or exterior surfaces.
Meter Offsets
Meter Offsets are used to connect conduit to meter boxes. The offset is used to move the path of the conduit away from the wall and into the holes in the meter box.
PVC Wireway (NEMA 4X)
PVC Condulets (Access Fittings)